3-amp fused cigarette lighter plug, connected to a 2.1 x 5.5 mm right-angle DC plug suitable for use with the Tracker2, as well as other devices like [...]
This cable adapts the FC-301/D radio (without T2-301 TNC installed) to the standard 6-pin mini-DIN connection used by many TNCs. The red and black [...]
This cable is designed to simplify connection of the T2-301 or T3-301 TNC/radio combination. The yellow end connects to the tracker module, and the [...]
DC wall adapter with 2.1 mm center positive plug. Suitable for use with the OT2m, OT3m, and ADS-SR1. Input: 110 volts AC Output: 9 volts DC, 350 mA
This 16-inch antenna is intended for the 144-148 MHz band and offers a significant performance increase over our smaller antennas.
Programming adapter for the FC-301/D data radio. Male connector on one end for connection to the radio, and female on the other for connection to a [...]
A hard-to-find 5-conductor USB mini-B pigtail cable. The cable exits to the right when seen from the cable side. We also stock a similar cable that [...]
CML Microcircuits MX614 1200 bps Bell 202 compatible modem IC, used in many packet radio circuits. 16 pin DIP package.
CML Microcircuits MX614 1200 bps Bell 202 compatible modem IC, used in many packet radio circuits. 16 pin SOIC package.
For ADS-SR1 repeater. Works with many models of Motorola handhelds, including the following: CP88, CP040, CP100, CP150, CP200, CT150, CT250, [...]
Radio interface cable for use with the ADS-SR1 repeater. Works with many varieties of Yaesu/Vertex Standard radios, including the VX-170, VX-6R, [...]
The Motorola GM300 is great commercial radio and can often be found used for a very reasonable price, but it's not the easiest radio to interface to [...]
Female DB9 to 8-pin mini-DIN cable for low speed data with the ICOM ID-800 D-STAR radio. This cable is equivalent to ICOM part number OPC-1384, and [...]
Soft case for small radios, including the Puxing PX-777.
Replacement anemometer assembly with RJ11 modular connector, for use with our wind/rain sensor assembly or the ADS-WS1 weather station.
