Clamp-on ferrite RFI filter for cables 3 to 5 mm in diameter. These filters fit perfectly on our speaker mic cables and TH-D7 cables, as well as the data cables for the Deluo and Garmin GPS 18 receivers.
Some handheld radios (certain older Icom models in particular) are vulnerable to RFI on their speaker mic cables when connected to a tracker, and can lock themselves in transmit mode if the cable is too close to the antenna. Installing one of these filters almost always fixes the problem.
For detailed specifications, see the manufacturer’s data sheet: TDK ZCAT1325-0530A-BK
| Weight | 0.1 lbs |
|---|
Be the first to review “Ferrite clamp filter”
Related products
Radio Interface Cables
Speaker/mic cable for various Motorola handheld radios
Simplex Repeater
Connects the ADS-SR1 or EchoBridge to many Yaesu/Vertex Standard handheld radios with a screw-in connector
Simplex Repeater
EchoBridge and ADS-SR1 repeater interface cable for most Kenwood mobile radios having an RJ45 microphone jack
Extras
PacTec model CNS-0101 black ABS case with matching perfboard.
Radio Interface Cables
Use this listing to order a custom tracker or repeater cable not in our standard inventory.
Radio Interface Cables
Female DB9 to 8-pin mini-DIN cable for low speed data with the ICOM ID-800 D-STAR radio. This cable is equivalent to ICOM part number OPC-1384, and is used for low-speed data, not radio programming. We carry a low-profile male-male null modem adapter that allows this cable to be used with a GPS receiver for DPRS [...]
Radio Interface Cables
This adapter plugs into the GM300's 16-pin accessory port and adapts it to the 6-pin Mini-DIN packet data connector common in the amateur radio world
Reviews
There are no reviews yet.